Labtek Enterprises manufactures and supplies precision Test Sieves for particle size analysis, material grading and laboratory quality control. Our range supports aggregate, soil, cement, construction-material and research laboratories across India.
Get assistance selecting the correct sieve by aperture size, mesh, micron requirement, frame material and applicable ASTM or ISO test standard.
Share your required aperture or application for selection assistance.
Share your Test Sieve, mesh, micron or laboratory equipment requirement. Our team will assist with product selection.
Explore laboratory sieving and material-testing equipment for laboratory, construction and quality-control applications.
Precision laboratory sieves for mesh, micron and aperture-based particle-size analysis.
Explore Equipment → AGGREGATE TESTINGEquipment for aggregate impact, crushing, grading and construction-material quality control.
Explore Equipment → SOIL TESTINGLaboratory instruments for soil consistency, penetration, moisture and geotechnical testing.
Explore Equipment → BITUMEN TESTINGInstruments for bitumen extraction, ductility, softening point and road-material testing.
Explore Equipment → CEMENT TESTINGTesting instruments for cement consistency, setting characteristics and laboratory evaluation.
Explore Equipment → CONCRETE TESTINGEquipment for fresh and hardened concrete testing in laboratories and construction quality control.
Explore Equipment →
Explore precision sieving and laboratory testing instruments for particle size analysis, soil testing, aggregate testing, bitumen testing and quality-control applications.
Labtek Enterprises manufactures and supplies laboratory Test Sieves for accurate particle size analysis, material grading and quality-control applications. Laboratory sieves are commonly used in aggregate, soil, cement, construction-material, powder and general laboratory testing.
The correct sieve should be selected according to the required aperture opening, frame diameter, sieve material and applicable test method. For mechanical sieve analysis, laboratories can use compatible Test Sieves with our Sieve Shaker for particle size analysis.
Test Sieves may be selected with reference to standards such as ASTM E11 and ISO 3310, depending on the laboratory procedure and customer requirement. These standards are commonly associated with specified sieve openings and woven-wire test sieves used for particle-size analysis.
Brass Test Sieves are widely used for routine laboratory applications, while stainless-steel Test Sieves may be preferred where durability, corrosion resistance or specific laboratory conditions are important.
For a commonly used laboratory configuration, see our 8 Inch Brass Test Sieve.
Test sieve sizes are often described using a sieve number, aperture opening in millimetres or a micron value. The actual aperture opening should be used as the primary reference when selecting a sieve for a defined laboratory test method.
| Sieve No. | Opening | Micron |
|---|---|---|
| No. 4 | 4.75 mm | 4750 µm |
| No. 8 | 2.36 mm | 2360 µm |
| No. 20 | 850 µm | 850 µm |
| No. 40 | 425 µm | 425 µm |
| No. 100 | 150 µm | 150 µm |
| No. 200 | 75 µm | 75 µm |
Note: Mesh-number terminology can vary between sieve standards, so the required aperture and applicable test procedure should be confirmed before ordering.
For sieve analysis, multiple sieves with progressively smaller openings can be stacked to determine particle-size distribution. If you need help selecting a mesh, micron size, aperture, sieve material or testing standard, contact Labtek Enterprises.
Labtek Enterprises manufactures precision laboratory sieves for particle-size analysis, material grading and quality-control applications. Brass-frame and stainless-steel options are available in multiple aperture ranges.
For buyers searching for Test Sieves Manufacturers in Delhi, Labtek Enterprises is based in New Delhi and supplies laboratory sieves for aggregate, soil, cement, construction-material, powder and research testing requirements. Selection support is available for aperture, mesh, micron and frame material.
Laboratory sieves are supplied to customers across India for particle-size analysis and material testing. Requirements can be selected by sieve diameter, aperture opening, construction material and applicable test method.
Labtek Enterprises is based in New Delhi and supplies laboratory test sieves across India. For an accurate quotation, specify the aperture or mesh/micron requirement, frame diameter, frame and sieving-media material, applicable test standard and quantity.
Labtek Enterprises
MSC 139, Yog Maya, Multani Dhanda, New Delhi 110055, India.
+91 98105 81994 · Email Labtek
For pricing and availability, share the required nominal aperture, frame diameter, construction material, applicable IS/ASTM/ISO reference, quantity and delivery location. See the 8 Inch Brass Test Sieves page for a detailed product example.
Use our Mesh & Micron Guide, Brass vs Stainless Steel Guide, IS 460 Guide and ASTM E11 vs ISO 3310 reference, or contact us with your specification.
A practical reference based on our listed 8-inch brass laboratory sieve range. Confirm the required test method and aperture before ordering.
| Typical frame diameter | 8 inch / 20 cm for the listed brass configuration |
|---|---|
| Frame construction | Polished brass frame |
| Fine sieving media | Stainless-steel wire mesh options |
| Coarse openings | Perforated-plate options for larger apertures |
| Referenced requirements | IS 460, ASTM E11 and ISO 3310 references, depending on the applicable laboratory test method |
| Common applications | Aggregate, soil, cement, construction material, powder classification and laboratory particle-size analysis |
| Sieve-shaker use | Compatible motorized systems; see our Sieve Shaker Machine and Sieve Shaker Selection Guide |
Use the standard named in your laboratory method. Aperture size, construction and inspection requirements should be specified explicitly rather than inferred from a generic mesh number.
ASTM E11-24 covers woven-wire sieve cloth, sieve construction, standard and non-standard frame sizes, and inspection procedures. ASTM states an applicable nominal aperture range from 125 mm down to 20 µm.
ISO 3310-1:2016 specifies technical requirements and corresponding test methods for laboratory sieves of metal wire cloth. ISO lists an aperture range from 125 mm down to 20 µm and confirms the 2016 edition remains current.
BIS records the 2020 fourth revision in three parts: Part 1 for wire-cloth sieves, Part 2 for perforated-plate sieves, and Part 3 for methods of examination of sieve apertures.
Technical references for aperture selection, standards, sieve inspection, sieve analysis and laboratory shaker selection.
Use verified millimetre-to-micron aperture conversions and learn why mesh-number systems should not be treated as interchangeable.
Read the guideUnderstand the scope of two widely referenced test-sieve standards and what to confirm before specifying a sieve.
Compare standardsUnderstand IS 460 Parts 1, 2 and 3 for wire cloth, perforated plate and examination of sieve apertures.
Read IS 460 guideLearn the difference between sieve inspection, calibration-sieve classifications and performance verification.
Read inspection guideFollow a method-aware workflow from sample preparation and sieve stacking to retained-mass calculations and reporting.
Read procedure guideChoose a laboratory shaker by test method, sieve diameter, stack capacity, sample type and required motion.
Choose a shakerQuick guidance on mesh size, micron openings, standards, materials and sieve selection for laboratory particle size analysis.
A Test Sieve is a laboratory screening instrument with a controlled opening size used to separate and classify particles according to size. Test Sieves are commonly used for particle size analysis, material grading and quality-control testing.
Mesh refers to the number of openings across a defined length of sieve mesh, while micron describes the approximate size of the opening in micrometres. For precise selection, the actual aperture or opening size should be checked against the required test method or standard.
ASTM E11 and ISO 3310 are widely used standards covering requirements for test sieves and sieve cloth. The suitable standard depends on the test procedure, laboratory specification and applicable industry requirement.
Both materials are used for laboratory sieving. Stainless steel is commonly selected where corrosion resistance and durability are important, while brass frames may be suitable for general laboratory applications. Selection should also consider the test method, sample material and operating environment.
Start with the required aperture, mesh or micron size, followed by the applicable testing standard, sieve diameter, frame material and sample type. If the specification is unclear, our team can assist with technical sieve selection.
View Test Sieves or contact Labtek Enterprises for selection assistance.
A sieve shaker helps provide repeatable mechanical agitation when multiple sieves are stacked for particle size analysis. It is useful where consistent sieving motion, test repeatability and efficient sample separation are required.
Yes. Labtek Enterprises supplies laboratory sieves and testing equipment to customers across India. Share the required specification and delivery location for assistance.
Yes. Share the required aperture, mesh or micron size, frame diameter, material preference and applicable testing standard. We can assist with selecting a suitable sieve configuration for the application.
Labtek Enterprises is a trusted name among Test Sieves Manufacturers in India. Based in Delhi, we supply high-precision laboratory sieves along with Soil Testing Equipment, Cement & Concrete Testing Instruments, Aggregate Testing Equipment, Bitumen Testing Equipment and General Laboratory Instruments.
To supply dependable laboratory testing equipment with clear technical guidance, consistent quality and responsive customer support.
To remain a trusted source for Test Sieves and material-testing equipment through reliable products, practical application support and continuous improvement.
Dependable laboratory equipment with emphasis on product quality and responsive support.
Practical guidance for selecting suitable Test Sieves and laboratory testing equipment.
Experience supporting laboratory and construction-material testing applications.
Testing equipment supply and customer support for requirements across India.
Share your required aperture, mesh or micron size, frame material and applicable testing standard. Labtek Enterprises can help you identify a suitable Test Sieve configuration for your laboratory application.
Original product, workshop and equipment photographs from Labtek Enterprises.
